Who Should Attend:
Employees and subcontractors of LG Representatives and Distribution Partners who will be performing field installations of LG ductless systems.

Course Overview – What You’ll Learn:
This training covers the manufacturer’s guidelines for installing piping and wiring systems associated with LG Duct-Free Split (DFS) indoor and outdoor air conditioning units.

How You’ll Learn:
The session begins with a brief introduction to LG inverter technology, followed by detailed lectures focused on system installation—with a strong emphasis on piping and control wiring best practices. Instruction will be delivered through PowerPoint presentations, group discussions, and hands-on lab activities. In the lab, participants will be introduced to LGMV Mobile, LG’s performance evaluation tool, which is essential for assessing system operation prior to startup. Charging procedures and pre-commissioning tasks will also be addressed.

Prerequisites:

1. Advanced technical knowledge of residential A/C, heat pump, and air distribution systems
2. Basic proficiency in Microsoft Office programs, including Excel, PowerPoint, and Word
   

What to Bring:

• A laptop or PC with a web browser 
• Students who wish to have LGMV installed on their device should ensure their system meets compatibility requirements

Registration: Participants must register at https://lghvac.com/training/ to receive LG Pro Dealer credit and a certificate of completion.

Extras: Refreshments and lunch will be provided.

Class approved for 4 CE hours KY Masters/Journeyman, 4 CE hours OH, 4 CE hours Vanderburg Co, IN Masters, and NATE CE hours. Per state rules, repeat courses do not qualify for accumulative credits. Each class must be unique. i.e. Taking (2) Heat Pump Classes only qualifies for 4 CE hours total, whereas (1) Inverter Technology Class & (1) Heat Pump Class = 8 CE hours

This class covers:

• Installation and service of heat pump systems.
• New communicating systems and how to setup the system for maximum efficiency.
•  Proper check out and operation of the reversing valve and defrost boards.
• 454B updates and equipment covered 

Refreshments/dinner provided

Class approved for 4 CE hours KY Masters/Journeyman, 4 CE hours OH, 4 CE hours Vanderburg Co, IN Masters, and NATE CE hours. Per state rules, repeat courses do not qualify for accumulative credits. Each class must be unique. i.e. Taking (2) Heat Pump Classes only qualifies for 4 CE hours total, whereas (1) Inverter Technology Class & (1) Heat Pump Class = 8 CE hours

Residential & Light Commercial Essentials Training

Who Should Attend:
Employees and subcontractors of LG Representatives and Distribution Partners who will be servicing and repairing LG ductless air conditioning systems.

Course Overview – What You’ll Learn:
This course provides an in-depth look at the key components of LG ductless systems, including PCBs, EEVs, BLDC motors, compressors, and more. Students will gain a modular-level understanding of how each component contributes to the proper operation of the system. Instruction will also cover electrical connections—both indoor and outdoor—and how these elements interact. The course includes hands-on guidance for accessing major system components and performing essential service and maintenance tasks.

How You’ll Learn:
Training combines classroom-based instruction with practical, hands-on exercises using live LG equipment in the lab. Students will follow a step-by-step troubleshooting process and use LGMV Mobile, LG’s performance and diagnostic tool, to evaluate and resolve real-time equipment issues.

Prerequisites:

1. Advanced technical knowledge of residential A/C, heat pump, and air distribution systems
2. Basic working knowledge of Microsoft Office programs including Excel, PowerPoint, and Word

LGMV Note:
Students interested in using the LGMV PC version should contact their Representative or Distributor to obtain an LGMV kit.

What to Bring:

• A laptop or PC with a web browser 
• Students who wish to have LGMV installed on their computer should ensure compatibility in advance

Registration:
Participants must register at https://lghvac.com/training/ to receive LG Pro Dealer credit and a certificate of completion.

Extras:
Refreshments and lunch are provided

Class approved for 4 CE hours KY Masters/Journeyman, 4 CE hours OH, 4 CE hours Vanderburg Co, IN Masters, and NATE CE hours. Per state rules, repeat courses do not qualify for accumulative credits. Each class must be unique. i.e. Taking (2) Heat Pump Classes only qualifies for 4 CE hours total, whereas (1) Inverter Technology Class & (1) Heat Pump Class = 8 CE hours

HVAC 2 Home Performance Presents:Single Day measureQuick Certifed User with True Flow Grid

Join us at the Corken Steel Training Center for a hands-on, real-world training experience designed to elevate your HVAC performance. Whether you're looking to fine-tune your diagnostics, reduce building loads, or become a go-to resource for verified performance—this event delivers the tools, tactics, and credentials to do it all.

Credential Pathways at a Glance

Day(s) Attended Credential Earned Requirements
✅ measure Quick Certified User
✅ Airflow Diagnostic Specialist Certificate Attendance only

HVAC System Commissioning, Airflow Testing & Smart Diagnostics

• Measure and verify airflow with True Flow Grid and manometers
• Hands-on functional diagnostics with measure Quick
• Learn full test-in → verify → report workflows
• Practice field documentation, performance validation, and homeowner communication
• ➕ Earn both:
  • ✅ measure Quick Certified User (no exam required)
  • ✅ Airflow Diagnostic Specialist Certificate

Who Should Attend?

Ideal for HVAC contractors, technicians, energy auditors, and commissioning agents who want to:

• Deliver performance, not just promises
• Reduce callbacks and stand out to builders and programs
• Back up design decisions with data
• Take the next step toward becoming a preferred contractor or verifier

 What’s Included

✅ Daily Breakfast & Lunch
✅ All Tools & Equipment Provided On-Site
✅ Official Certificates & Credentials Based on Your Attendance
✅ Small Group Format for Personalized, Hands-On Learning

Use promo code: Corken2026

Register Now

One Day Measurequick Training Flyer

This class is a hands on experience, teaching best practices for sizing, installation and service.  

Course work will include interacting with:

• a Noble Combi boiler
• domestic hot water production
• two zones of heating
• pumps
• zone valves
• air control
• water quality control
• hydraulic separation

Class approved for 2 CE hours KY Masters/Journeyman only. Per state rules, repeat courses do not qualify for accumulative credits. Each class must be unique. i.e. Taking (2) Heat Pump Classes only qualifies for 4 CE hours total, whereas (1) Inverter Technology Class & (1) Heat Pump Class = 8 CE hours

This LG training class delivers practical, classroom-based education focused on inverter-driven heat pump systems, proper system design, and correct installation principles. Taught by an LG Application and Design Specialist, attendees will gain a clear understanding of why LG inverter technology matters, how to properly size heat pump systems, and how LG solutions are applied in real-world scenarios. The majority of the class will focus on P.W.C. (Piping, Wiring, and Charging) best practices.

What you will learn:

•  What is an inverter compressor?– Here we discuss what an LG inverter compressor is, but more importantly, why it matters. Instead of hearing “inverter” simply as a buzz word, understand the impact that an LG inverter-based system will have on performance.
• How to size a heat pump – It is critical that systems are sized properly, and heat pumps can be tricky. Load calcs are critical and understanding how heat pumps perform is equally important. We will learn how to properly size a heat pump system.
•  LG product overview– We will present an overview of the LG equipment portfolio and possible solutions. But rest assured, this will not be a sales presentation reading through a catalog.
• Piping, Wiring and Charging (P.W.C.)– This is the core of the class where we will spend most of our time. Here we will discuss proper (and improper) installation practices. This will give an installer insights necessary to properly install an LG system.
• LG Pro Dealer Pathway to Platinum Program– We will highlight a few benefits of the LG Pro Dealer Program at a very high-level. If owners or managers want more information on the Program, we can discuss further or you can align with your LG Account Manager. Please note, miles can be given for this training!

Lunch provided.

This class offers LG miles towards the LG Pro Dealer levels. 
This class does not offer CE license hours.

LG HP Fundamentals 2-26-26

This 3-day course helps equip HVAC professionals with the knowledge and tools they need to balance commercial HVAC systems up to 20 tons, including Kitchen Exhaust and Make-Up Air systems.

In this class you will learn:

• Balance your own light commercial installations up to 25 tons
• Add a new profit center and distinguish your company from your competitors
• Use balancing as a diagnostic tool to solve airflow and comfort problems • Implement industry standard processes and produce professional reports
• Understand economizer and kitchen exhaust system fundamentals

Corken customers can enjoy a $25 discount when using the promo code CorkenKY at checkout

Cost of the class: $1200 without exam
                          $1295 with exam

Lunch and refreshments provided

To register go: National Comfort Institute's Website

Marketing Flier CAB_03

Includes study guide*, seminar, and test.

* Study guide to be picked up from our branch in advance to allow time for test preparation.

Candidates for this exam can be certified in any of three equipment categories plus Universal.

Core– General Information Must pass for any type of certification

Type 1 Small appliances, i.e. PTACs and window ACs

Type 2 Equipment using high pressure refrigerant, i.e. Residential ACs and heat pumps

Type 3 Equipment using low pressure refrigerant, i.e. chillers

Universal Any candidate passing all three Types, including Core

 Note: Additional tests and retests will have additional charges. 

EPA testing 3-10-26